Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Last revision Both sides next revision
switch [2019/04/08 17:04]
wolfmanjm [Spindle control button]
switch [2019/04/08 17:33]
wolfmanjm [Hobby Servo]
Line 139: Line 139:
 switch.servo.output_type ​                      ​swpwm ​           # Software pwm output settable with S parameter in the input_on_command switch.servo.output_type ​                      ​swpwm ​           # Software pwm output settable with S parameter in the input_on_command
 #​switch.servo.pwm_period_ms ​                   20               # set period to 20ms (50Hz) default is 50Hz #​switch.servo.pwm_period_ms ​                   20               # set period to 20ms (50Hz) default is 50Hz
-#​switch.servo.startup_state ​                   ​true             to enable ​startup_value+#​switch.servo.startup_state ​                   ​false            ​false uses startup_value ​on boot true uses default_on_value
 #​switch.servo.startup_value ​                   7.43             # On boot and HALT it will set this PWM value #​switch.servo.startup_value ​                   7.43             # On boot and HALT it will set this PWM value
 +#​switch.servo.default_on_value ​                ​3.3 ​             # This PWM value will be set if M280 doe snot have an S parameter, it is also the value used if startup_state is true
 </​code>​ </​code>​