Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Last revision Both sides next revision
supported-g-codes [2019/05/16 23:21]
91.160.218.196 remove link from M7 M8 M9
supported-g-codes [2019/05/16 23:22]
91.160.218.196 remove link from M7 M8 M9 corrected
Line 47: Line 47:
 | [[M3]] | Starts the spindle. Only if spindle module is enabled. The S parameter sets the speed in rotations per minute | <​kbd>​M3 S5000</​kbd>​ | | [[M3]] | Starts the spindle. Only if spindle module is enabled. The S parameter sets the speed in rotations per minute | <​kbd>​M3 S5000</​kbd>​ |
 | [[M5]] | Stops the spindle Only if spindle module is enabled.| <​kbd>​M5</​kbd>​ | | [[M5]] | Stops the spindle Only if spindle module is enabled.| <​kbd>​M5</​kbd>​ |
-[M7| Starts the mist switch for CNC (Need to create a switch called : switch.mist.enable).| <​kbd>​M7</​kbd>​ | +| M7 | Starts the mist switch for CNC (Need to create a switch called : switch.mist.enable).| <​kbd>​M7</​kbd>​ | 
-[M8| Starts the flood switch for CNC (Need to create a switch called : switch.flood.enable).| <​kbd>​M8</​kbd>​ | +| M8 | Starts the flood switch for CNC (Need to create a switch called : switch.flood.enable).| <​kbd>​M8</​kbd>​ | 
-[M9| Stops the mist and flood at same time (like LinuxCNC and GRBL).| <​kbd>​M9</​kbd>​ |+| M9 | Stops the mist and flood at same time (like LinuxCNC and GRBL).| <​kbd>​M9</​kbd>​ |
 | M17 | Enable stepper motors | <​kbd>​M17</​kbd>​ | | M17 | Enable stepper motors | <​kbd>​M17</​kbd>​ |
 | M18 | Disable stepper motors. With a parameter it will disable that stepper motor A will disable extruder 1 B will disable extruder 2. E0 will disable the currently selected extruder | <​kbd>​M18</​kbd>​ <​kbd>​M18 X0</​kbd>​ <​kbd>​M18 E0</​kbd>​ | | M18 | Disable stepper motors. With a parameter it will disable that stepper motor A will disable extruder 1 B will disable extruder 2. E0 will disable the currently selected extruder | <​kbd>​M18</​kbd>​ <​kbd>​M18 X0</​kbd>​ <​kbd>​M18 E0</​kbd>​ |