Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
rectangular-grid-calibration-options [2018/03/01 22:48]
195.218.22.174 Compensation dampening options added
rectangular-grid-calibration-options [2018/03/01 22:49] (current)
195.218.22.174 Example values are added for new compensation options
Line 10: Line 10:
 || leveling-strategy.rectangular-grid.human_readable ​   ||  true      || Human readable formatting of probe table || || leveling-strategy.rectangular-grid.human_readable ​   ||  true      || Human readable formatting of probe table ||
 || leveling-strategy.rectangular-grid.only_by_two_corners ||  true      || G29/31/32 will not work without providing XYAB parameters: ​       XY - start point, AB rectangle size from starting point. "Two corners""​ not absolutely correct name for this mode, because it use only one corner and rectangle size. This mode designed for PCB milling when you work with board size differ from bed size. More about this mode in [[/​pcb-milling|PCB milling]]|| || leveling-strategy.rectangular-grid.only_by_two_corners ||  true      || G29/31/32 will not work without providing XYAB parameters: ​       XY - start point, AB rectangle size from starting point. "Two corners""​ not absolutely correct name for this mode, because it use only one corner and rectangle size. This mode designed for PCB milling when you work with board size differ from bed size. More about this mode in [[/​pcb-milling|PCB milling]]||
-|| leveling-strategy.rectangular-grid.dampening_start ||  ​NaN      || Compansation normally is applied for all heights, with full power. If you set this setting to a height, the compensation will start to be applied less and less (linearly) until "​height_limit"​ is reached. Any height before this setting is still will be compensated fully || +|| leveling-strategy.rectangular-grid.dampening_start ||  ​0.5      || Compansation normally is applied for all heights, with full power. If you set this setting to a height, the compensation will start to be applied less and less (linearly) until "​height_limit"​ is reached. Any height before this setting is still will be compensated fully || 
-|| leveling-strategy.rectangular-grid.height_limit ||  ​NaN      || The compensation algorithm will stop working after this limit, starting from the "​dampening_start"​ parameter. After the height goes through this limit, no more compansation will be applied ||+|| leveling-strategy.rectangular-grid.height_limit ||  ​     || The compensation algorithm will stop working after this limit, starting from the "​dampening_start"​ parameter. After the height goes through this limit, no more compansation will be applied ||