Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
g92-cnc [2017/01/25 18:55]
arthur
g92-cnc [2017/02/21 09:12] (current)
wolfmanjm [G92 G-code]
Line 3: Line 3:
 == G92 G-code == G92 G-code
  
-On a CNC mill, G92 means "set an offset in all coordinate systems"​.+G92 means "set an offset in all coordinate systems"​.
  
 The machine coordinates are the position of the machine relative to the point at which the [[endstops]] are hit. The machine coordinates are the position of the machine relative to the point at which the [[endstops]] are hit.