Delta Grid Calibration Options

The Delta Grid leveling strategy provides automatic bed leveling for delta-style 3D printers by probing multiple points across the print surface.

The following are the configuration options for the Delta Grid leveling strategy:

The zprobe module must also be enabled and configured for this leveling strategy to work.

Option	Value	Description
leveling-strategy.delta-grid.enable	true	The strategy must be enabled in the config, as well as the zprobe module.
leveling-strategy.delta-grid.size	7	The size of the grid, for example, 7 causes a 7x7 grid with 49 points. Must be an odd number.
leveling-strategy.delta-grid.probe_offsets	0,0,0	Optional probe offsets from the nozzle or tool head. NOTE: Z must be 0
leveling-strategy.delta-grid.save	false	If the saved grid is to be loaded on boot then this must be set to true.
leveling-strategy.delta-grid.initial_height	10	Optionally, an initial_height can be set that tells the initial probe where to stop the fast descent before it probes. This should be around 5-10mm above the bed.