| |
| — | panel-options [2022/07/17 17:35] (current) – created - external edit 127.0.0.1 |
|---|
| | | panel.enable | true | Set to true to enable the panel interface. Panels are a screen, an encoder wheel and/or a set of buttons, used to control your machine. | |
| | | panel.lcd | reprap_discount_glcd | Type of panel we are connecting. Each panel has a specific interface so we need to specify which panel we will be connecting. The currently supported panel types are ''reprap_discount_glcd'', ''st7565_glcd'', ''ssd1306_oled'', ''viki2'', ''mini_viki2'' and ''universal_adapter''. | |
| | | panel.spi_channel | 0 | SPI channel to use | |
| | | panel.spi_cs_pin | <kbd>0.16</kbd> | CS ( Chip Select ) pin to use, this can be used to have several different devices on the same SPI port, as long as each device has a separate CS pin. Note that the RRD GLCD panel does not support this and requires being alone on it's port. | |
| | | panel.spi_frequency | 500000 | SPI port frequency - some panel need it explicitly set| |
| | | panel.contrast | 9 | Contrast value for panels that support it ( <kbd>viki2</kbd>, <kbd>mini_viki2</kbd> and <kbd>st7565_glcd</kbd> ) | |
| | | panel.reverse | false | If set to true, reverse the screen. | |
| | | panel.busy_pin | <kbd>nc</kbd> | If using the <kbd>universal_adapter</kbd>, this pin can be connected to the adapter to ask it if it is busy or not. | |
| | | panel.a0_pin | <kbd>nc</kbd> | If using a viki or SSD1306 this is needed to drive the C/D pin on the display | |
| | | panel.rst_pin | <kbd>nc</kbd> | If using an SSD1306 this pin is sometimes required and connects to the reset pin on the display | |
| | | panel.encoder_a_pin | <kbd>3.25!^</kbd> | A pin for the encoder wheel. Encoders have two pins : A and B. Set to <kbd>nc</kbd> if you use no encoder. ^ defines menu move direction | |
| | | panel.encoder_b_pin | <kbd>3.26!^</kbd> | B pin for the encoder wheel. Encoders have two pins : A and B. Set to <kbd>nc</kbd> if you use no encoder. ^ defines menu move direction | |
| | | panel.encoder_resolution | <kbd>2</kbd> | the number of pulses the encoder emits per detent/click | |
| | | panel.click_button_pin | <kbd>1.30!^</kbd> | Pin for the click ( "enter" ) button | |
| | | panel.buzz_pin | <kbd>1.31</kbd> | Pin for the buzzer | |
| | | panel.back_button_pin | <kbd>2.11!^</kbd> | Pin for the back button | |
| | | panel.up_button_pin | <kbd>0.1!</kbd> | Pin for the up button | |
| | | panel.down_button_pin | <kbd>0.0!</kbd> | Pin for the down button | |
| | | panel.menu_offset | 0 | On some panels, this value must be set to 1. This is a number of lines to offset the menu lines by on screen. | |
| | | panel.alpha_jog_feedrate | 6000 | X jogging feedrate in millimetres/minute. This is used when jogging using the panel screen. | |
| | | panel.beta_jog_feedrate | 6000 | Y jogging feedrate in millimetres/minute. This is used when jogging using the panel screen. | |
| | | panel.gamma_jog_feedrate | 200 | Z jogging feedrate in millimetres/minute. This is used when jogging using the panel screen. | |
| | | panel.hotend_temperature | 185 | Temperature to set the hotend to when using the pre-heating menu item | |
| | | panel.bed_temperature | 60 | Temperature to set the bed to when using the pre-heating menu item | |
| | | panel.external_sd | true | Set to true if your panel has an external SD card slot, or if you want to connect a second SD card slot to one of your Smothieboard's SPI ports | |
| | | panel.external_sd.spi_channel | 0 | Set the SPI channel the external SD card is on | |
| | | panel.external_sd.spi_cs_pin | <kbd>2.8</kbd> | Set the CS ( Chip Select ) pin for the external SD card, this allows you to use multiple devices on the same SPI port, as long as they each have a CS pin | |
| | | panel.external_sd.sdcd_pin | <kbd>2.13!^</kbd> | SD card detect signal pin, set to <kbd>nc</kbd> if you don't use a SD card detect signal | |
| | | custom_menu.''menu_name''.enable | true | When set to true, create a new custom menu entry for the panel with the name ''menu_name''. You can create any number of custom entries as long as they have different names. **NOTE** ''menu_name'' is case sensitive| |
| | | custom_menu.''menu_name''.name | Power_on | The name that will be displayed in the panel's menus | |
| | | custom_menu.''menu_name''.command | <kbd>M80_S30|G1_X10</kbd> | The command that will be executed when the menu entry is selected and clicked. Note that the <kbd> _ </kbd> character gets converted to space in the menu and commands ( and must be used instead of the space character ) , and the <kbd> | </kbd> character is used to separate multiple commands | |
