Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
g92 [2017/01/25 15:11]
arthur
g92 [2021/02/22 16:51] (current)
Line 1: Line 1:
-[[[f>image]|https://imgs.xkcd.com/comics/standards.png]]+<html> 
 +<!-- Original Wikidot-time syntax, auto-replaced: «<html> 
 +<!-- Original Wikidot-time syntax, auto-replaced: «[[f>image https://imgs.xkcd.com/comics/standards.png]]» --> 
 +<img src="/_media///external/https.imgs.xkcd.com.comics.standards.png" class="pull-right" undefined> 
 +</html>» --> 
 +<img src="/_media//external/https.imgs.xkcd.com.comics.standards.png" class="pull-right" undefined> 
 +</html>
  
 == G92 G-code == G92 G-code
  
-The G92 G-code can mean different things depending on whether you are using a CNC mill, or a 3D printer.+The G92 G-code means "set an offset for all coordinate systems".
  
-This is because when the Reprap project chose it's Gcodes, and what they are supposed to do, they completely ignored the existing G-code standard, and messed everything up. +To see more information on the G92 Gcode see [[G92-cnc]]
  
-Not our fault !+On 3D printers ''G92 E0'' will reset the currently selected extruder position to 0.
  
-On a Reprap, the G92 Gcode means "change the position of the origin (0,0,0) for this machine to a specified point relative to the current position". 
- 
-On a CNC mill ( traditionally ), the G92 G-code means "set an offset for all coordinate systems". 
- 
-In the Smoothie firmware, if you set {{grbl_mode}} to {{true}}, it will have the "CNC mill" meaning, and if you set it to {{false}} ( or do not set it at all ), it will have the Reprap meaning. See [[grbl-mode]]. 
- 
-To see information on the G92 Gcode for CNC mills, see [[G92-cnc]] 
- 
-To see information on the G92 Gcode for Reprap machines, see [[G92-reprap]]