Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
zprobe [2019/05/16 17:52]
wolfmanjm [Configuration]
zprobe [2019/08/13 21:56] (current)
92.117.190.46 Clarified naming of option by putting full name in text
Line 644: Line 644:
  1. Set the homing offset to allow for the probe offset and/or reduce the grids x/y size to accommodate the probe offsets.  1. Set the homing offset to allow for the probe offset and/or reduce the grids x/y size to accommodate the probe offsets.
  2. You could invert one or multiple axis so (0,0) is in an accessible position.  2. You could invert one or multiple axis so (0,0) is in an accessible position.
- 3. You can set <kbd>​only_by_two_corners</​kbdto true and specify the offset in Gcode using the <​kbd>​M31</​kbd>​ command.\\ See more on that in the PCB milling section: [[http://​smoothieware.org/​pcb-milling|PCB Milling]]+ 3. You can set  
 +<code>leveling-strategy.rectangular-grid.only_by_two_corners ​       true</code 
 +and specify the offset in Gcode using the <​kbd>​M31</​kbd>​ command.\\ See more on that in the PCB milling section: [[http://​smoothieware.org/​pcb-milling|PCB Milling]]
  
 </​callout>​ </​callout>​