Differences

This shows you the differences between two versions of the page.

Link to this comparison view

three-point-strategy-options [2017/01/25 14:20] (current)
arthur created
Line 1: Line 1:
 +|| leveling-strategy.three-point-leveling.enable || true || Set to true to enable the leveling strategy that probes three points to define a plane and then keeps the Z parallel to that plane. This is useful if your Z plate/bed is not perfectly aligned with your XY gantry ||  
 +|| leveling-strategy.three-point-leveling.point1 || 100.0,0.0 || The first probe point (X, Y) ||  
 +|| leveling-strategy.three-point-leveling.point2 || 200.0,200.0 || The second probe point (X, Y) ||  
 +|| leveling-strategy.three-point-leveling.point3 || 0.0,200.0 || The third probe point (X, Y) ||  
 +|| leveling-strategy.three-point-leveling.home_first || true || Home the X and Y axes before probing ||  
 +|| leveling-strategy.three-point-leveling.tolerance || 0.03 || The probe tolerance in millimetres,​ anything less that this will be ignored, default is 0.03mm ||  
 +|| leveling-strategy.three-point-leveling.probe_offsets || 0,0,0 || The probe offset from nozzle, must be X,Y,Z (Z should always be 0), default is no offset. This is used if your nozzle is not exactly at the same position as where your tool would be. ||  
 +|| leveling-strategy.three-point-leveling.save_plane || false || Set to true to allow the bed plane to be saved with M500, default is false ||