Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Last revision Both sides next revision
supported-g-codes [2019/05/16 23:20]
91.160.218.196 Add M7 M8 M9
supported-g-codes [2019/05/16 23:22]
91.160.218.196 remove link from M7 M8 M9 corrected
Line 47: Line 47:
 | [[M3]] | Starts the spindle. Only if spindle module is enabled. The S parameter sets the speed in rotations per minute | <​kbd>​M3 S5000</​kbd>​ | | [[M3]] | Starts the spindle. Only if spindle module is enabled. The S parameter sets the speed in rotations per minute | <​kbd>​M3 S5000</​kbd>​ |
 | [[M5]] | Stops the spindle Only if spindle module is enabled.| <​kbd>​M5</​kbd>​ | | [[M5]] | Stops the spindle Only if spindle module is enabled.| <​kbd>​M5</​kbd>​ |
-[[M7]] | Starts the mist switch for CNC (Need to create a switch called : switch.mist.enable).| <​kbd>​M7</​kbd>​ | +| M7 | Starts the mist switch for CNC (Need to create a switch called : switch.mist.enable).| <​kbd>​M7</​kbd>​ | 
-[[M8]] | Starts the flood switch for CNC (Need to create a switch called : switch.flood.enable).| <​kbd>​M8</​kbd>​ | +| M8 | Starts the flood switch for CNC (Need to create a switch called : switch.flood.enable).| <​kbd>​M8</​kbd>​ | 
-[[M9]] | Stops the mist and flood at same time (like LinuxCNC and GRBL).| <​kbd>​M9</​kbd>​ |+| M9 | Stops the mist and flood at same time (like LinuxCNC and GRBL).| <​kbd>​M9</​kbd>​ |
 | M17 | Enable stepper motors | <​kbd>​M17</​kbd>​ | | M17 | Enable stepper motors | <​kbd>​M17</​kbd>​ |
 | M18 | Disable stepper motors. With a parameter it will disable that stepper motor A will disable extruder 1 B will disable extruder 2. E0 will disable the currently selected extruder | <​kbd>​M18</​kbd>​ <​kbd>​M18 X0</​kbd>​ <​kbd>​M18 E0</​kbd>​ | | M18 | Disable stepper motors. With a parameter it will disable that stepper motor A will disable extruder 1 B will disable extruder 2. E0 will disable the currently selected extruder | <​kbd>​M18</​kbd>​ <​kbd>​M18 X0</​kbd>​ <​kbd>​M18 E0</​kbd>​ |