Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
stepper-motors [2017/03/02 19:51]
wolfmanjm
stepper-motors [2017/09/08 09:48] (current)
141.12.89.10 [Configuring]
Line 239: Line 239:
 <callout type="​warning"​ icon="​true"​ title="​ Moving bed">​ <callout type="​warning"​ icon="​true"​ title="​ Moving bed">​
  
-If you have a moving bed in the Y axis for example, as opposed to a moving tool, be careful : what matters is the direction of the head relative to the bed, not the direction of the bed relative to the machine. It's very common to get confused and invert your Y axis ​on moving bed machines (or not invert it when it should be).  Basically, if an asymmetrical object looks like the model when it is printed, then your Y axis is correct, otherwise you need to change your configuration.+If you have a moving bed in the Y axis for example, as opposed to a moving tool, be careful : what matters is the direction of the head relative to the bed, not the direction of the bed relative to the machine. It's very common to get confused and invert your Y axis ​on moving bed machines (or not invert it when it should be).  Basically, if an asymmetrical object looks like the model when it is printed, then your Y axis is correct, otherwise you need to change your configuration.
 </​callout>​ </​callout>​