Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
pwm-capable [2017/01/25 18:26]
arthur
pwm-capable [2017/01/25 18:35] (current)
arthur
Line 1: Line 1:
-This page is a summary of [[[ LPC1769 Pin Usage ]]] concerning only hardware PWM capable pins. +This page is a summary of [[ LPC1769 Pin Usage ]] concerning only hardware PWM capable pins. 
-Hardware PWM is available only on pins {{2.0}} to {{2.5}}{{1.18}}{{1.20}}{{1.21}}{{1.23}}{{1.24}}{{1.26}}{{3.25}} and {{3.26}}+Hardware PWM is available only on pins <kbd>2.0</​kbd> ​to <kbd>2.5</​kbd>​<kbd>1.18</​kbd>​<kbd>1.20</​kbd>​<kbd>1.21</​kbd>​<kbd>1.23</​kbd>​<kbd>1.24</​kbd>​<kbd>1.26</​kbd>​<kbd>3.25</​kbd> ​and <kbd>3.26</​kbd>​
  
-If you plan to use a hobby servo, LEDs, lasers or any kind of device which require PWM with the [[[ Switch | Switch module ​]]], ensure to pick the right pin depending on your board version.+If you plan to use a hobby servo, LEDs, lasers or any kind of device which require PWM with the [[ Switch | Switch module ]], ensure to pick the right pin depending on your board version.
  
 == Available hardware PWM pins == Available hardware PWM pins
Line 9: Line 9:
 || P1.20 ||leds_disable||leds_disable||leds_disable|| led3  ||set leds_disable in config to use it|| || P1.20 ||leds_disable||leds_disable||leds_disable|| led3  ||set leds_disable in config to use it||
 || P1.21 ||leds_disable||leds_disable||leds_disable|| led4  ||set leds_disable in config to use it|| || P1.21 ||leds_disable||leds_disable||leds_disable|| led4  ||set leds_disable in config to use it||
-|| P1.23 ||{{available}}||{{available}}|| || 3rd large fet  || ||+|| P1.23 ||<kbd>available</​kbd>​||<kbd>available</​kbd>​|| || 3rd large fet  || ||
 || P1.24 || || || || alpha_min_endstop ​ ||can be used on delta without min endstops|| || P1.24 || || || || alpha_min_endstop ​ ||can be used on delta without min endstops||
 || P1.26 || || || || beta_min_endstop ​  ||can be used on delta without min endstops|| || P1.26 || || || || beta_min_endstop ​  ||can be used on delta without min endstops||
Line 15: Line 15:
 || P2.1 || || || || beta_step_pin ​ || || || P2.1 || || || || beta_step_pin ​ || ||
 || P2.2 || || || || gamma_step_pin ​ || || || P2.2 || || || || gamma_step_pin ​ || ||
-|| P2.3 ||{{available}}|| || || delta_step_pin ​ || ||+|| P2.3 ||<kbd>available</​kbd>​|| || || delta_step_pin ​ || ||
 || P2.4 || || || || psu.output_pin ​ || || || P2.4 || || || || psu.output_pin ​ || ||
 || P2.5 || || || || bed.heater_pin ​ || || || P2.5 || || || || bed.heater_pin ​ || ||
-|| P3.25 ||{{available}}||{{available}}||{{available}}|| || used for encoder pin for all panels|| +|| P3.25 ||<kbd>available</​kbd>​||<kbd>available</​kbd>​||<kbd>available</​kbd>​|| || used for encoder pin for all panels|| 
-|| P3.26 ||{{available}}||{{available}}||{{available}}|| || used for encoder pin for all panels||+|| P3.26 ||<kbd>available</​kbd>​||<kbd>available</​kbd>​||<kbd>available</​kbd>​|| || used for encoder pin for all panels||
  
 Depending on the configuration Depending on the configuration