Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
pt100 [2017/03/27 17:09]
216.98.56.20
pt100 [2017/05/18 01:33] (current)
70.83.197.215
Line 13: Line 13:
 </​callout>​ </​callout>​
  
-You wire a PT100 //almost// the same way you would a thermistor, but you need to specify Smoothie it is a PT100 and where you connected the amplifier signal output:+You wire a PT100 //almost// the same way you would a thermistor, but you need to specify ​to Smoothie it is a PT100 and where you connected the amplifier signal output:
  
 <​code>​ <​code>​
Line 20: Line 20:
 temperature_control.hotend.e3d_amplifier_pin ​  ​1.30 ​       # must be a free ADC pin, not a temperature input temperature_control.hotend.e3d_amplifier_pin ​  ​1.30 ​       # must be a free ADC pin, not a temperature input
 </​code>​ </​code>​
 +
 +<callout type="​info"​ icon="​true">​
 +When using a PT100 sensor type you do not need to set values for the thermistor kind or thermistor_pin. If you do, these values will be ignored.
 +</​callout>​
  
 <callout type="​danger"​ icon="​true">​ <callout type="​danger"​ icon="​true">​