Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
panel [2018/12/20 07:25]
66.232.203.23 [MKS TFT32 3.2-inch Full-Color Touch Screen]
panel [2019/05/16 01:01] (current)
88.130.96.215 [Viki2 from panacutt.com] link had a typo, added direct link to product in description
Line 17: Line 17:
 * Viki2 and Miniviki2, from [[http://​www.panucatt.com/​|panucatt]] * Viki2 and Miniviki2, from [[http://​www.panucatt.com/​|panucatt]]
 * SSD1306 based OLED displays * SSD1306 based OLED displays
-* [[http://​smoothieware.org/​panel#​mks-tft32-32-inch-full-color-touch-screen|MKS TFT32 Touch Screen]] 
  
 Supported SPI chips:​- ​ ST7565, ST7920, SSD1306 Supported SPI chips:​- ​ ST7565, ST7920, SSD1306
Line 163: Line 162:
  
 On the back of the GLCD EXP1 is to left and EXP2 is to right, pin 1 is bottom left, pin 2 is top left etc. On the back of the GLCD EXP1 is to left and EXP2 is to right, pin 1 is bottom left, pin 2 is top left etc.
-=5v is EXP1 pin 10, Gnd is EXP1 pin 9+5v is EXP1 pin 10, Gnd is EXP1 pin 9
  
 <​code>​ <​code>​
Line 228: Line 227:
 ~~CLEARFIX~~ ~~CLEARFIX~~
  
-== Viki2 from panacutt.com+== Viki2 from panucatt.com
  
-Viki2 wires to an Azteeg X5 mini with a flat cable as it has 1:1 pin mapping. The ConfigSample for the Azteeg mini has the config settings required, just uncomment them,+[[http://​www.panucatt.com/​product_p/​vikilcd2.htm|Viki2]] wires to an Azteeg X5 mini with a flat cable as it has 1:1 pin mapping. The ConfigSample for the Azteeg mini has the config settings required, just uncomment them,
  
 The config for Azteeg X5 is different to smoothieboard and is shown in the file https://​github.com/​Smoothieware/​Smoothieware/​blob/​2f88d440ee3f79cb5202d242967b555fa35c7423/​ConfigSamples/​AzteegX5Mini/​config#​L178 The config for Azteeg X5 is different to smoothieboard and is shown in the file https://​github.com/​Smoothieware/​Smoothieware/​blob/​2f88d440ee3f79cb5202d242967b555fa35c7423/​ConfigSamples/​AzteegX5Mini/​config#​L178
Line 388: Line 387:
 panel.external_sd.sdcd_pin ​         0.28!^ ​          # sd detect signal (set to nc if no sdcard detect) panel.external_sd.sdcd_pin ​         0.28!^ ​          # sd detect signal (set to nc if no sdcard detect)
 </​code>​ </​code>​
- 
-== MKS TFT32 3.2-inch Full-Color Touch Screen ​ 
- 
-The MKS TFT32 3.2-inch Full-Color Touch Screen is a full screen LCD touch screen controller for the MKS SBASE 1.3. 
- 
-Image: https://​tinyurl.com/​y8rxyx5o 
- 
-The touch screen makes navigation fast and the full color is helpful to those with vision problems. 
- 
-<callout type="​info"​ icon="​true"​ title="​ Power and Data">​ 
-Power and data is via a flat cable connected to the AUX-1 connection on the Smoothieboard. ​ 
-</​callout>​ 
- 
-<callout type="​info"​ icon="​true"​ title="​ Firmware">​ 
-This display has firmware which can be flashed using the same steps as flashing the MKS SBASE 1.3 except using an mkstft28.bin file. 
- 
-[[https://​github.com/​makerbase-mks/​MKS-TFT|Official Firmware]] 
- 
-When flashing the display firmware you must use the SD card reader built into the display. ​ The microSD on the MKS SBASE 1.3 will not work for flashing the display firmware. 
-</​callout>​ 
- 
-<callout type="​info"​ icon="​true"​ title="​ Customization">​ 
-Look and functionality of this display can be altered by updating the configuration file in the same manner as the MKS SBASE 1.3 except using an mks_config.txt file. 
- 
-Customizations include: 
-    *Language settings 
-    *Background color 
-    *Text color 
-    *3D effects 
-    *Variety of button styles 
- 
- 
- 
-</​callout>​ 
- 
-<callout type="​warning"​ icon="​true"​ title="​ Baud rates">​ 
-When updating the display configuration you must use the SD card reader built into the display. ​ The microSD on the MKS SBASE 1.3 will not work for updating the display configuration. 
- 
-The touch screen controls will not function properly if the display baud rate does not match the board baud rate: 
- 
-Sample configuration entry: 
- 
-#baud rate (9600:1; 57600:2; 115200:3; 250000:4) 
->​cfg_baud_rate:​4 
- 
-</​callout>​