Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
network [2018/09/08 23:10]
arthur
network [2018/09/21 11:08] (current)
arthur
Line 211: Line 211:
 If your network interface doesn'​t work as it should, you can get some debugging information ( such as the current IP ) by sending the <​kbd>​net</​kbd>​ command ( <​kbd>​@net</​kbd>​ from pronterface ) command via the console ( USB or UART ). If your network interface doesn'​t work as it should, you can get some debugging information ( such as the current IP ) by sending the <​kbd>​net</​kbd>​ command ( <​kbd>​@net</​kbd>​ from pronterface ) command via the console ( USB or UART ).
  
 +<​code>​
 +IP Addr: 192.168.1.100
 +IP GW: 192.168.1.254
 +IP mask: 255.255.255.0
 +MAC Address: 00:​1F:​11:​02:​04:​C9
 +</​code>​
 = API = API
  
Line 227: Line 233:
 Example output :  Example output : 
  
 +<​code>​
 <​Idle|MPos:​-700.0000,​0.0000,​360.0000,​0.0000|WPos:​-700.0000,​0.0000,​360.0000|F:​4000.0000|T:​163.5,​0.0|B:​178.4,​0.0>​ <​Idle|MPos:​-700.0000,​0.0000,​360.0000,​0.0000|WPos:​-700.0000,​0.0000,​360.0000|F:​4000.0000|T:​163.5,​0.0|B:​178.4,​0.0>​
 +</​code>​
  
 Much faster than sending "get status"​ using /command Much faster than sending "get status"​ using /command