Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
homepage-draft [2017/01/25 14:19]
arthur created
homepage-draft [2017/01/25 18:37] (current)
arthur
Line 1: Line 1:
 [[div class="​text-center"​]] [[div class="​text-center"​]]
-Welcome to Smoothie +Welcome to Smoothie 
-[[/div]]+
 [[div class="​jumbotron"​]] [[div class="​jumbotron"​]]
 [[div class="​container"​]] [[div class="​container"​]]
Line 21: Line 21:
  
     [[/div]]     [[/div]]
-[[/div]] + 
-[[/div]]+
  
  
Line 29: Line 29:
  In a nutshell  In a nutshell
  [[/div]]  [[/div]]
-[[/div]]+
  
 [[div class="​text-center"​]] [[div class="​text-center"​]]
Line 39: Line 39:
  [[span class="​h3"​]] Powerful [[/span]]  [[span class="​h3"​]] Powerful [[/span]]
   
- Designed to run on [http://​www.nxp.com/​products/​microcontrollers/​product_series/​lpc1700/​ 32 bit hardware] in an age of [https://​www.arduino.cc/​en/​Main/​ArduinoBoardMega2560 8-bit boards], with a lot of effort put into optimisation,​ and moving forward to [http://​www.nxp.com/​products/​microcontrollers/​product_series/​lpc4300/​ more powerful] platforms as they appear. Does it's job faster, more correctly, and of course smoothly. [[a data-toggle="​collapse"​ href="#​u-collapse-powerful"​]] More [[/a]]+ Designed to run on [[http://​www.nxp.com/​products/​microcontrollers/​product_series/​lpc1700/​|32 bit hardware]] in an age of [[https://​www.arduino.cc/​en/​Main/​ArduinoBoardMega2560|8-bit boards]], with a lot of effort put into optimisation,​ and moving forward to [[http://​www.nxp.com/​products/​microcontrollers/​product_series/​lpc4300/​|more powerful]] platforms as they appear. Does it's job faster, more correctly, and of course smoothly. [[a data-toggle="​collapse"​ href="#​u-collapse-powerful"​]] More [[/a]] 
  
  
-[[/div]] 
  
  [[div class="​col-md-4"​]]  [[div class="​col-md-4"​]]
Line 49: Line 49:
  [[span class="​h3"​]] Open Source [[/span]]  [[span class="​h3"​]] Open Source [[/span]]
   
- Open-Source [https://​github.com/​Smoothieware/​Smoothieware firmware] running on Open-Hardware [https://​github.com/​Smoothieware/​Smoothieboard boards], written and designed by the community, for the community. Contributors welcome !  [[a data-toggle="​collapse"​ href="#​u-collapse-opensource"​]] More [[/a]]+ Open-Source ​[[https://​github.com/​Smoothieware/​Smoothieware|firmware]] running on Open-Hardware ​[[https://​github.com/​Smoothieware/​Smoothieboard|boards]], written and designed by the community, for the community. Contributors welcome !  [[a data-toggle="​collapse"​ href="#​u-collapse-opensource"​]] More [[/a]]
  [[/div]]  [[/div]]
  
Line 56: Line 56:
   
  [[span class="​h3"​]] Universal [[/span]]  [[span class="​h3"​]] Universal [[/span]]
- Brings different communities together to create a larger project :​ supports [http://​smoothieware.org/​laser-cutter-guide laser cutting], [http://​smoothieware.org/​3d-printer-guide 3D printing] and [http://​smoothieware.org/​cnc-mill-guide CNC milling], instead of specializing on one job. Means more community, more contributors,​ more features, more eyes on the code, more documentation and more awesomeness. [[a data-toggle="​collapse"​ href="#​u-collapse-universal"​]] More [[/a]]+ Brings different communities together to create a larger project :​ supports ​[[http://​smoothieware.org/​laser-cutter-guide|laser cutting]], [[http://​smoothieware.org/​3d-printer-guide|3D printing]] and [[http://​smoothieware.org/​cnc-mill-guide|CNC milling]], instead of specializing on one job. Means more community, more contributors,​ more features, more eyes on the code, more documentation and more awesomeness. [[a data-toggle="​collapse"​ href="#​u-collapse-universal"​]] More [[/a]]
  [[/div]]  [[/div]]
  
  
  
-[[/div]] + 
-[[/div]]+
  
  
 [[div class="​text-center"​]] [[div class="​text-center"​]]
 [[div class="​row"​]] [[div class="​row"​]]
-[[div class="​col-md-12"]]+<​grid>​ 
 +<col md="12">
  
 [[div id="​collapse-powerful"​ class="​collapse panel panel-default"​]] [[div id="​collapse-powerful"​ class="​collapse panel panel-default"​]]
Line 74: Line 75:
 When Smoothie was designed originally, all Open-Hardware CNC controllers were running on the awesome Arduino, which is 8-bit. When Smoothie was designed originally, all Open-Hardware CNC controllers were running on the awesome Arduino, which is 8-bit.
  
-While this platform led to some incredible progress, like pretty much launching the [http://​www.reprap.org/​ Reprap] project, it was coming to it's limits, adding features was difficult, there were some serious technical shortcomings and limitations. ​+While this platform led to some incredible progress, like pretty much launching the [[http://​www.reprap.org/​|Reprap]] project, it was coming to it's limits, adding features was difficult, there were some serious technical shortcomings and limitations. ​
  
 Smoothie was created to take advantage of the more powerful 32-bit microcontrollers available at the time, to add more features, do things more correctly and faster, and be able to experiment again. Smoothie was created to take advantage of the more powerful 32-bit microcontrollers available at the time, to add more features, do things more correctly and faster, and be able to experiment again.
Line 84: Line 85:
 The firmware is the result of years of hard work making sure we use as much of the additional power as we can, and is improved in nearly every way possible in terms of performance and features, compared to code running on older platforms. The firmware is the result of years of hard work making sure we use as much of the additional power as we can, and is improved in nearly every way possible in terms of performance and features, compared to code running on older platforms.
  
-[[/div]] +</col> 
-[[/div]]+</grid>
  
 [[div id="​collapse-opensource"​ class="​collapse panel panel-default"​]] [[div id="​collapse-opensource"​ class="​collapse panel panel-default"​]]
Line 93: Line 94:
 Everything Smoothie-related,​ from the code, to the hardware design files, to the documentation,​ is fully Open-Source. Everything Smoothie-related,​ from the code, to the hardware design files, to the documentation,​ is fully Open-Source.
  
-The firmware is licensed under the [http://​www.gnu.org/​licenses/​gpl-3.0.en.html GPL v3 license] and can be found at https://​github.com/​Smoothieware/​Smoothieware+The firmware is licensed under the [[http://​www.gnu.org/​licenses/​gpl-3.0.en.html|GPL v3 license]] and can be found at https://​github.com/​Smoothieware/​Smoothieware
  
-The hardware files for the Smoothieboard are licensed under the [http://​www.ohwr.org/​projects/​cernohl/​wiki CERN OHL v.1.2] and can be found at https://​github.com/​Smoothieware/​Smoothieboard+The hardware files for the Smoothieboard are licensed under the [[http://​www.ohwr.org/​projects/​cernohl/​wiki|CERN OHL v.1.2]] and can be found at https://​github.com/​Smoothieware/​Smoothieboard
  
-All of the documentation on this wiki is user-produced,​ and licensed under the Creative Commons [http://​creativecommons.org/​licenses/​by-sa/​3.0/​ CC-BY-SA 3.0] license.+All of the documentation on this wiki is user-produced,​ and licensed under the Creative Commons ​[[http://​creativecommons.org/​licenses/​by-sa/​3.0/​|CC-BY-SA 3.0]] license.
  
 We strongly believe in the idea of Open-Source and Open-Hardware,​ and see every day how much awesomer sharing everything makes a project. We strongly believe in the idea of Open-Source and Open-Hardware,​ and see every day how much awesomer sharing everything makes a project.
  
-[[/div]] + 
-[[/div]]+
  
 [[div id="​collapse-universal"​ class="​collapse panel panel-default"​]] [[div id="​collapse-universal"​ class="​collapse panel panel-default"​]]
Line 111: Line 112:
 The main 3 machines supported currently, are laser cutters, 3D printers and CNC mills, and each has a step by step guide : The main 3 machines supported currently, are laser cutters, 3D printers and CNC mills, and each has a step by step guide :
  
-[[include ​guides]]+{{page>guides}}
  
 Other machines machine types are possible, like vinyl cutters, and more machines are planned, like lathes, plasma cutters and 4/5-axis CNC mills. Other machines machine types are possible, like vinyl cutters, and more machines are planned, like lathes, plasma cutters and 4/5-axis CNC mills.
Line 121: Line 122:
 And it also means that if the laser people make the motion control code better, the 3D printer people profit from the change, which wouldn'​t be the case if each community had their separate monolithic firmwares. And it also means that if the laser people make the motion control code better, the 3D printer people profit from the change, which wouldn'​t be the case if each community had their separate monolithic firmwares.
  
-[[/div]] 
-[[/div]] 
  
-[[/div]] + 
-[[/div]] + 
-[[/div]]+ 
 + 
  
  
Line 157: Line 158:
  [[/div]]  [[/div]]
  
-[[/div]] + 
-[[/div]]+
  
  
Line 188: Line 189:
  [[/div]]  [[/div]]
  
-[[/div]] + 
-[[/div]]+