Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
g30 [2017/04/21 09:12]
124.168.198.125 [Parameters] added F to speed example
g30 [2018/05/11 21:53] (current)
146.90.249.51 [Format]
Line 27: Line 27:
 Which means : move ( in the Z axis ) until the probe is triggered, then report what distance was traveled. Which means : move ( in the Z axis ) until the probe is triggered, then report what distance was traveled.
  
-You can also do : +You can also do :
  
 <​code>​ <​code>​
Line 33: Line 33:
 </​code>​ </​code>​
  
-Which means : move ( in the Z axis ) until the probe is triggered, then set the Z position to 10.+Which means : move ( in the Z axis ) until the probe is triggered, then set the current ​Z position to 10. (using G92 Z10).
  
 This is useful for example if you want to use the probe to measure the distance between something else on the actuator and what is touched, and you know the distance between the probe'​s height and that thing'​s height. This is useful for example if you want to use the probe to measure the distance between something else on the actuator and what is touched, and you know the distance between the probe'​s height and that thing'​s height.