Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
g28-1 [2017/01/25 16:12]
arthur
g28-1 [2017/01/25 18:55] (current)
arthur
Line 1: Line 1:
 == G28.1 G-code == G28.1 G-code
  
-G28.1 means "store the origin position that the machine goes to when the {{{G28}}} command is issued"​.+G28.1 means "store the origin position that the machine goes to when the <kbd>{G28</​kbd>​} command is issued"​.
  
 This position is stored into memory, but is lost if the machine is reset. You can make that position permanent by sending the [[M500]] G-code. This position is stored into memory, but is lost if the machine is reset. You can make that position permanent by sending the [[M500]] G-code.
Line 9: Line 9:
 The command is used as such :  The command is used as such : 
  
-[[code]]+<code>
 G28.1 X10 Y10 G28.1 X10 Y10
-[[/code]]+</code>
  
 Which means : record the origin position as being at the X position 10 and Y position 10 Which means : record the origin position as being at the X position 10 and Y position 10
Line 18: Line 18:
  
 ||~ Parameter ||~ Usage ||~ Example || ||~ Parameter ||~ Usage ||~ Example ||
-|| {{X}} || Record origin position for X axis || G28.1 X10 || +|| <kbd>X</​kbd> ​|| Record origin position for X axis || G28.1 X10 || 
-|| {{Y}} || Record origin position for Y axis || G28.1 Y10 || +|| <kbd>Y</​kbd> ​|| Record origin position for Y axis || G28.1 Y10 || 
-|| {{Z}} || Record origin position for Z axis || G28.1 Z10 ||+|| <kbd>Z</​kbd> ​|| Record origin position for Z axis || G28.1 Z10 ||
  
 === Friend G-codes === Friend G-codes
Line 26: Line 26:
 This G-code sets the origin position that the [[G28]] G-code goes to. This G-code sets the origin position that the [[G28]] G-code goes to.
  
-And you can use the [[[M500]]|G-code to save this position into the [http://​smoothieware.org/​configuring-smoothie config-override]] permanently.+And you can use the [[M500]] G-code to save this position into the [[http://​smoothieware.org/​configuring-smoothie|config-override]] permanently.
  
 === Further reading === Further reading