Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
g1 [2019/05/13 21:00]
arthur
g1 [2019/05/13 21:04] (current)
arthur [Parameters]
Line 36: Line 36:
 || <​kbd>​S</​kbd>​ || Laser power, <​kbd>​S1</​kbd>​ is 100%, <​kbd>​S0</​kbd>​ is 0% || G1 X10 S0.5 || || <​kbd>​S</​kbd>​ || Laser power, <​kbd>​S1</​kbd>​ is 100%, <​kbd>​S0</​kbd>​ is 0% || G1 X10 S0.5 ||
  
-<callout type="​warning"​ icon="​true"​ title="​E moves ​and floating points">+<callout type="​warning"​ icon="​true"​ title="​Extruder moves and scientific notation">
  
 If you write this Gcode : If you write this Gcode :
Line 42: Line 42:
 <​code>​ G1X100E100 </​code>​ <​code>​ G1X100E100 </​code>​
  
-Smoothie ​is going to interpret ​this as +You want Smoothie to interpret ​it as 
  
-<​code>​ G1 : move +<​code> ​ 
-X10E10 ​: move in X by 10E10, which is also 10 to the power of 10, or 10000000000.+G1 : move ... 
 +X10 : ... by 10mm in the X direction ... 
 +E10 : ... while also feeding the extruder 10mm of extrusion 
 +</​code>​ 
 + 
 +However Smoothie is going to interpret this as  
 + 
 +<​code>​  
 +G1 :​ move ​... 
 +X10E10 : ... in the direction ​by 10E10, which is also 10 to the power of 10, or 10000000000.
 </​code>​ </​code>​