I followed the below guide (can't post guide but its the one for x5 mini v1 that's on the smoothie lCD guide) but for the pins found the correct ones on the azteeg v2 and matched them Accordingly
On top of that I'm using pins 1.23 for PWM control and pins .26 for fire
I then copied the config for the SD reader and noticed I don't have pin .27 and that I'm using .26 so that's why I decided to try pins .14 and .17. But it did not work so either pins .14 and .17 don't work for SD support or I'm using the wrong pins from my lCD.
I really have very little knowledge on how pins on the board work and I'm just trying to learn from trial and error and support from you guys