I'm having an issue configuring the network interface for DHCP on my X5. When I set it up for "auto" the display show an IP Address of 0.0.0.0 and it does not respond on either http or telnet. However if I look at my DHCP server I see that it has been assigned an IP address and the host name is recorded.
If I switch to fixed IP address everything works fine. Since it successfully register with DHCP it is puzzling why the firmware does not recognizes that it has acquired an IP address.
All that is connected to the X5 (Uberclock) is the display adapter (Robotseed), a reprap discount LCD and power supply (USB not connected). I also loaded the latest edge build to see if that made any difference. No change.
Here are the config file settings with the working fixed IP setting commented out.