Ok. Bit of background. My computer sees my smoothieborad 5x fine, I can connect with pronterface and print no problems. I can access and change the config file. . All functions like home etc work so no problems there. I bought my board fully populated
Problem 1 - the only lights on my board are VBB and 3.3v. None of the other leds are lit. I have removed the card, copied the files over, formatted the card to fat 32 and put the files back on but that did not fix anything. What should be my next move?
Problem 2- I set the small mosfet P2-6 to switch my hotend since the current draw is only 3.5A at 24v. However now the mosfet led is always on if 24v is applied to the power in and there is 24v continuosly from the output. Has something failed or did I fry the mosfet? Everything on the board looks fine, no fizzes, smells or smoke. Just the mosfets do not turn off unless it is related to problem 1
thanks for your help