Forum » Smoothie Firmware / General
Number of threads: 805
Number of posts: 3829
rss icon RSS: New threads | New posts
Order by:
Last post date
Thread starting date
Create a new thread
Thread name Started Posts Recent post
by: sgibbers17sgibbers17
07 Jan 2017 22:13
1  
I have followed the install new web interface guide but cant access it.
by: JadedJakJadedJak
07 Jan 2017 20:39
1  
I need help with connecting higher power needed heated bed then what the smoothieboard can provide. But I have no clue how to connect it to the board and have it working??? I read about hooking up a SSR so I thought that should be same similar? But that did not work. I hope someone can help me of how to hook it up and changing configuration to make them work thanks
by: vova_28vova_28
05 Jan 2017 05:06
6 by Craig AndersonCraig Anderson
07 Jan 2017 13:08 Jump!
by: flowerbobflowerbob
04 Jan 2017 23:47
1  
What pin to use for second CS? Are SCK, MISO, 3v3, GND shared?
by: Jeshua LacockJeshua Lacock
01 Oct 2015 04:12
14 by arthurwolfarthurwolf
04 Jan 2017 13:46 Jump!
homing works, future triggers crash
by: mlaustin6mlaustin6
30 Dec 2016 20:33
3 by arthurwolfarthurwolf
02 Jan 2017 14:39 Jump!
Unable to communicate with BLTouch via pronterface
by: mrseanpaul81mrseanpaul81
13 Aug 2016 03:27
4 by Alex DoranAlex Doran
02 Jan 2017 12:46 Jump!
When homing a very large printer (Z 850mm), the arms only go up about 80% of the way then slow down, go up a bit, down a bit and back up a bit, then stop, about 300-400mm from the top.
by: albertzerokalbertzerok
01 Jan 2017 20:04
3 by albertzerokalbertzerok
02 Jan 2017 01:38 Jump!
Trying to create x and y offsets
by: mlaustin6mlaustin6
30 Dec 2016 08:53
4 by mlaustin6mlaustin6
01 Jan 2017 22:48 Jump!
I would like to convert my home built. Mach3 powered CNC machine to a smoothie board powered machine
by: Chris TrumbullChris Trumbull
30 Dec 2016 20:58
8 by EmanuelBEmanuelB
01 Jan 2017 22:01 Jump!
Is there a Smoothieware equivalent to the M600 command under marlin.
by: JD-StumpyJD-Stumpy
30 Dec 2016 01:46
2 by arthurwolfarthurwolf
30 Dec 2016 12:10 Jump!
by: Craig AndersonCraig Anderson
12 Dec 2016 17:13
3 by singhm29singhm29
29 Dec 2016 18:58 Jump!
Really odd behaviour with a particular STL model which will randomly disconnect during a print
by: singhm29singhm29
26 Dec 2016 00:59
9 by singhm29singhm29
29 Dec 2016 04:02 Jump!
ist mein Board defekt?
by: Thomas LichtThomas Licht
26 Dec 2016 09:39
10 by Thomas LichtThomas Licht
28 Dec 2016 16:01 Jump!
Encoder Not working SBase 1.2 + GLCD
by: albertzerokalbertzerok
26 Dec 2016 13:39
4 by arthurwolfarthurwolf
28 Dec 2016 10:10 Jump!
by: Alex DoranAlex Doran
22 Dec 2016 16:16
1  
by: Chris CruteChris Crute
22 Dec 2016 14:51
6 by Chris CruteChris Crute
22 Dec 2016 14:57 Jump!
trying to get delta grid compensation to work on rectangular bed
by: dksredksre
02 Dec 2016 10:52
7 by dksredksre
20 Dec 2016 13:09 Jump!
by: Thomas LichtThomas Licht
17 Dec 2016 10:23
1  
by: Thomas LichtThomas Licht
16 Dec 2016 12:33
7 by Thomas LichtThomas Licht
17 Dec 2016 10:18 Jump!