Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
delta [2017/10/24 16:25]
81.231.13.55
delta [2018/09/16 00:10] (current)
73.129.181.243 Editing the config is almost necessary for those porting over from other firmwares... Do we need to discourage it that hard?
Line 35: Line 35:
 To setup your Smoothieboard for control of a linear delta machine, you must select the linear_delta arm solution ( this is true for all linear delta type bots - older versions of the firmware included separate configurations for Rostock and Kossel printers). To setup your Smoothieboard for control of a linear delta machine, you must select the linear_delta arm solution ( this is true for all linear delta type bots - older versions of the firmware included separate configurations for Rostock and Kossel printers).
  
-To modify your configuration file for a linear delta arm solution ​( we just said you shouldn'​t do that ), change/add the following :+To modify your configuration file for a linear delta arm solution, change/add the following :
  
 <​code>​ <​code>​