Differences

This shows you the differences between two versions of the page.

Link to this comparison view

delta-calibration-strategy-options [2017/01/25 14:19]
arthur created
delta-calibration-strategy-options [2020/04/19 22:16] (current)
wolfmanjm
Line 1: Line 1:
 || leveling-strategy.delta-calibration.enable ||  true ||  Set to true to enable the delta calibration levelling strategy. This uses the probe to figure out the plane'​s tilt and arm's radius in a delta machine || || leveling-strategy.delta-calibration.enable ||  true ||  Set to true to enable the delta calibration levelling strategy. This uses the probe to figure out the plane'​s tilt and arm's radius in a delta machine ||
 || leveling-strategy.delta-calibration.radius || 100 || Radius at which to probe the three points || || leveling-strategy.delta-calibration.radius || 100 || Radius at which to probe the three points ||
-|| leveling-strategy.delta-calibration.initial_height || 10 || the initial height above the bed we stop the initial move down after home to find the bed. This should be a height that is enough that the probe will not hit the bed and is an offset from gamma_max (can be set to 0 if gamma_max takes into account ​the probe offset) ​||+|| leveling-strategy.delta-calibration.initial_height || 10 || the initial height above the bed we stop the initial move down after home to find the bed. This should be a height that is enough that the probe will not hit the bed and is the absolute Z position ​||